Simex | Measure, Control & Log Data

Simex OVERVIEW

Datasheets linked below. For user manuals and other documentation, send your request to sales@pcspl.com.au

Simex Series SRP-94 Programmable Process Meter

[...]

Data Sheets

Simex Series SRL-49 Bar Graph Process Meter

[...]

Data Sheets

CREATOR: gd-jpeg v1.0 (using IJG JPEG v62), quality = 85

Simex Series SRP-N118

Process Meter IP67 Case

[...]

Data Sheets

Simex Series SUR-457 Large Display Universal Meter

[...]

Data Sheets

Simex MultiLog SRD-99 Multi Channel Data Logger

[...]

Data Sheets

Simex MultiCon CMC Multi Channel Controller

[...]

Data Sheets

Simex Series SRP-73 Programmable Process Meter

[...]

Data Sheets

Simex Series PUR-94 Programmable PID Controller

[...]

Data Sheets

Simex Series SLIK-N118 Electronic Counter and Controller

[...]

The SLIK-N118 universal, programmable counters are encased in a tight, wall-mounted housing (IP 67) and equipped with two independent counting inputs that can operate in various configurations (pulse or quadrature). Additional programmable inputs can change basic functions of counting inputs (addition or subtraction of pulses from inputs, change the direction of counting) or hold counting without clearing.

The SLIK-N118 counter features an independent reset input. The REL/OC outputs with programmable thresholds can be used to control external equipment. The counter may be configured without opening the case, by using the remote controller or with free S-Config software via the RS-485 communication port.

Multi-purpose counter in wall mounted IP 67 case

Batching function

2 pulse counting inputs + 1 programmable function input

1 counter reset input

0 or 2 REL / OC outputs

Digital debouncing filter

4 counter reset sources (manual, ext, auto, modbus)

Free configuration software S-Config

Data Sheets

Simex SWT-99X

Multi-Channel Temperature Meter

[...]

Data Sheets

Simex Series SPI-94

Flow Meter Indicator / Controller

[...]

Data Sheets

Simex CPA-K-807

Plastic Pressure Transmitter

[...]

Data Sheets

Simex Series SWE-73-L

Loop Powered Indicator

[...]

Data Sheets

Simex Series SWE-N55L

Loop Powered Indicator

[...]

Data Sheets

Simex ProSens QM-100

Transmitter, Display and Controller

[...]

ProSens is a new line of modern industrial instruments, which integrates sensors, converters, meters and controller functionalities. Using the latest miniaturisation technologies these compact instruments are able to be equipped with two independent universal inputs, two binary or two analogue outputs, as well as a communication port RS-485 with Modbus protocol.

Model QM-100 is a version with universal inputs rather than specific probes.It can also communicate with master devices via Modbus protocol, being part of big network, which makes it perfect instrument for distributed monitoring system.

Transmitter, display, meter and controller in one package

Version without probe

1 or 2 universal inputs: 0/4-20 mA, 0-10V, 0-150 mV, RTD or TC

0, 1 or 2 REL outputs (electronic NO)

0, 1 or 2 analogue outputs, passive or active

RS-485 / Modbus RTU

Option: very clear 2.9'' graphic LCD display, 128 x 64 points, with backlight

Free configuration software S-Config

Data Sheets

Simex Series SRT-73

Temperature Meter

[...]

Data Sheets

Simex Series SRT-N118

Temperature Meter

[...]

Temperature meter in wall-mounted IP 67 case

Input: RTD or thermocouple

0 or 2 REL / OC outputs

Analogue output: active or passive, power supply output: 24V DC

RS-485 / Modbus RTU

Automatic recognition of 3 and 4-conductor connection (RTD inputs)

Automatic compensation of TC cold ends temperature

Signal peak value detection

Free configuration software S-Config

Data Sheets

Simex Series SLE-42

Electronic Counter

[...]

Data Sheets

Simex Series SLN-94

Electronic Counter

[...]

Data Sheets

Simex Series SLIK-94

Counter & Batch Controller

[...]

Data Sheets

Simex Series SPI-N118

Rate Meter Indicator & Controller

[...]

Data Sheets

Simex Series SPP-94

Flow Meter Indicator & Controller

[...]

Data Sheets

Simex Series SLC-94

Timer/Clock

[...]

Data Sheets

Simex SRS-U4A-001

USB to RS485(Modbus) Converter

[...]

Data Sheets

Simex Series DRS-303

Level Switch

[...]

Data Sheets

Simex SZP-73

4-20mA Panel Mount Calibrator

[...]

Data Sheets

Simex SLI-8 Series

Serial Transmitter (Modbus/RS485)

[...]

Multi counters module SLI-8 allows to counting of pulses delivered to 8 isolated binary inputs independently. All counters are 24 bit long and can be read and cleared by user at any time. Occurrence of HIGH state on particular input is signalled by green LEDs marked IN1 to IN8. Incrementation of counter occurs after falling edge on particular input (input state changes from HIGH to LOW). It is essential that pulses have fulfill some time restrictions. These restrictions depend on settings of implemented internal digital filter, which allows to eliminate signal oscillations corresponding to contacts bouncing (of mechanical sensors).

Multi counter module

8 independent voltage inputs

RS-485 / Modbus RTU

LEDs for module operation and Modbus transmission signalling

Data Sheets

Simex SIAi-8 Series

Serial Transmitter (Modbus/RS485)

[...]

Module SIAi-8 allows to measure analog values from 8 current (or voltage) inputs via the RS-485 connection, with speed rate about 10 Hz (every channel). Measurements can be re-scaled with one of the available characteristics: linear, square or user definable multipoint (max. 20 points length). All SIAi-8 operating functions, available via the RS-485, can be implemented from any typical visualization software such as, with a suitable Multi-Con controller.

Analogue inputs module

8 independent analogue inputs (voltage or current)

RS-485 / Modbus RTU

LEDs for module operation and Modbus transmission signalling

Data Sheets

Simex TRS-02a

Temperature & Humidity Measurement System

[...]

TRS-02a is designed for multipoint measurement of temperature by means of a standard Pt100 sensor. It is designed for use with bayonet sensors to be used, for example, in smoke-houses. It may be used with any Pt100 sensors. This module features very good compensation of effect of connection cable resistance on the result of temperature measurement. Non-linear characteristics of the sensor is digitally linearized. It is equipped with RS-485 / Modus RTU communication interface.

Designed for multipoint temperature and humidity measurement systems

Collection, recording and sharing of information on temperature

Temperature measurement range: -50...+550°C

RS-485 / Modbus RTU communication

Possibility of connecting max. 127 modules on the RS-485 line in one network

Network solutions

SimCorder software to support the system

Data Sheets

Simex TRS-01a

Ambient Temperature Transducer

[...]

TRS-01a is designed particularly for multipoint temperature and humidity measurement systems to measure temperature in rooms where food products are manufactured and stored. It is equipped with RS-485 / Modus RTU communication interface. Measures temperature within the range of -40°C to +85°C. Has a small plastic casing.

Designed for multipoint temperature and humidity measurement systems

Collection, recording and sharing of information on temperature

Temperature measurement range: -40...+85°C

RS-485 / Modbus RTU communication

Possibility of connecting max. 127 modules on the RS-485 line in one network

Network solutions

SimCorder software to support the system

Data Sheets

Simex TRS-04a

Temperature & Humidity Transducer

[...]

TRS-04a is designed for multipoint temperature and humidity measurement systems. It is used for measuring conditions in rooms where food products are manufactured and stored. It is equipped with RS-485 / Modus RTU communication interface.

Designed for multipoint temperature and humidity measurement systems

Collection, recording and sharing of information on temperature and humidity

Temperature measurement range: 0...+70°C

Humidity measurement range: 0...100% RH

RS-485 / Modbus RTU communication

Possibility of connecting max. 127 modules on the RS-485 line in one network

Network solutions

SimCorder software to support the system

Data Sheets

Simex TRS-B1a

Audible Signal Device

[...]

The TRS-B1a sound signal device is designed to signal events with a sound or light. It is controlled by means of RS-485 link, which allows for activating of the sound signal (a buzzer with variable tone) and/or light signal (a flickering diode). The module is dedicated to the TRS Temperature Recording System and it is equipped with RS-485 / Modus RTU communication interface. It can be used with other systems where the communication is consistent with the Modbus RTU standard.

Sound signal device

Designed for multipoint temperature and humidity measurement systems

RS-485 / Modbus RTU communication

Possibility of connecting max. 127 modules on the RS-485 line in one network

Network solutions

SimCorder software to support the system

Data Sheets

Simex TRS-10a

Wall Mounted Indicator

[...]

The TRS-10a is designed to display digital values and short, 4-letter messages. This superior system makes the display flicker when a displayed value is not refreshed. It is a slave device that communicates with the Master device via RS-485 interface with Modbus RTU protocol. The indicator is dedicated to the TRS Temperature Recording System, yet it can cooperate with any superior system equipped with RS-485 link with Modbus RTU protocol.

Designed for multipoint temperature and humidity measurement systems

Display digital values and short, 4-letter messages

RS-485 / Modbus RTU communication

Possibility of connecting max. 127 modules on the RS-485 line in one network

Network solutions

SimCorder software to support the system

Data Sheets

Simex SWI-94 Series

Weight Meter

[...]

The SWI-94 weight meter is designed for operation with load cells (strain gages) in simple industrial applications not requiring legal metrology approval. The meter is equipped with operating pushbuttons which allow tare weight setting, zero setting for empty balance and displaying of gross and net weight values. The readouts of the measured mass are presented on a 6-digit LED display. The REL / OC control outputs can adjust the level of measured signal and are controlled according to one or two threshold values. The meter's software allows performing two calibration methods: data sheet calibration or dead weight calibration. Moreover, the meter can be additionally equipped with analogue outputs, according to the customer selection: active current output, passive isolated current output or active voltage output. The meter can be configured with the local keyboard or via the RS-485 communication port.

Weight meter to work with load cells in weighing and force measurement systems

Inputs: load cells 4-wire or 6-wire, 1 x digital

Outputs: 2 x digital (REL or OC), 1 x analogue (active or passive)

Data sheet or dead weight calibration

High protection class IP 65 (front side)

RS-485 / Modbus RTU

Signal peak value detection

Data Sheets

Simex SWS-N118

Digital Panel Serial Indicator

[...]

Data Sheets

Simex Series SWP-99

Multi-Channel Current & Voltage Meter

[...]

The SWP-99X meter is for measuring and display of current values from up to 8 measuring channels in 0/4-20 mA, 0/1-5 V, 0/2-10 V standard. Each channel can be individually designated (described) with any measuring unit. The LCD graphical display allows for visualization of the values from all 8 channels simultaneously. It's function includes viewing the trends in each measuring channel as graphs from the last 12 seconds to 8 hours. The SWP-99X includes electronic relay outputs that can be used to control external devices.

Multichannel meter with graphic LCD display

Up to 8 inputs 0/4-20 mA, 0/1-5 V, 0/2-10 V

2 electronic relay outputs (optoMOS)

Power supply output: 24V DC

Programmable measuring range and indication filtration

White colour LCD (amber backlight has been discontinued)

RS-485, USB-PC / Modbus RTU

Free configuration S-Toolkit software

Data Sheets

Simex SIR-25

IR Remote Control (replaces SIR-15)

[...]

The SIR-25 infrared remote control may be used as an external programming keyboard for all SIMEX devices equipped with IR receivers and remote programming functions. Pressing of any local IR controller key, causes transmission of it's code to the device. The remote control features a five-button keyboard, including the F/Σ/RESET function button dedicated to the operation of the devices in the groups: counters, flow meters, and tachometers. Functions of particular keys depend on devices features. The SIR-25 remote control replaces the SIR-15 device.

Infrared transmitter

Device remote control

Multifunctional keyboard

Operation range up to 5m

Ergonomic industrial housing

Data Sheets

Simex ProSens QM-612

Temperature & Humidity Measurement System

[...]

ProSens is a new line of modern industrial instruments, which integrates sensors, converters, meters and controllers functionalities. Using the latest miniaturisation technologies these compact instruments are able to be equipped with one independent universal input, two binary or two analogue outputs, as well as communication port RS-485 with Modbus protocol.

Model M-612 has a temperature or temperature and humidity cable probe. A large built-in display and output signals mean that the ProSens line units find applications in control systems. There are many industrial applications, where ProSens can act as stand-alone controller. It can also communicate with master devices via Modbus protocol, being part of big network, which makes it perfect instrument for distributed monitoring system.

Transmitter, display, meter and controller in one package

Temperature or temperature and humidity cable probe (gland or connector), Ø18 mm, L=90 mm, stainless steel 316L, PTFE filter cap

1 or 2 universal inputs: 0/4-20 mA, 0-10V, 0-150 mV, RTD or TC

0, 1 or 2 REL outputs (electronic NO)

0, 1 or 2 analogue outputs, passive or active

RS-485 / Modbus RTU

Option: very clear 2.9'' graphic LCD display, 128 x 64 points, with backlight

Free configuration software S-Config

Data Sheets

Simex SOC-8 Series

Serial (Modbus/RS485) to Digital Output Transmitter

[...]

The SOC-8 binary outputs module is used to control low-power output devices via the RS-485 connection. It finds application in distributed control and visualization systems. It can directly control, for example, contactors, relays, light bulbs and other DC loads with the 24V control (supply) voltage and the 0.5A current (maximum). Galvanic separation of all outputs ensures safe operation of the master system, without the risk of damage caused by dangerous overvoltage.

Binary outputs module

Open collector type outputs

RS-485 / Modbus RTU

LEDs for module operation and Modbus transmission signalling

Data Sheets

Simex Series SGS-61

Galvanic Separator

[...]

Data Sheets

Simex Series SPT-61

Converter

[...]

Data Sheets

Simex Series SGS-12

Isolator

[...]

Data Sheets

Simex Series SPT-86L

Temperature Transmitter

[...]

Data Sheets

Simex Series SLI-8

Serial Transmitter (Modbus/RS485)

[...]

Multi counter module

8 independent voltage inputs

RS-485 / Modbus RTU

LEDs for module operation and Modbus transmission signalling

Data Sheets

Simex SIN-8

Digital Input to Serial Transmitter (Modbus/RS485)

[...]

Module type SIN-8 allows to monitor 8 binary voltage inputs via the RS-485 connection. All SIN-8 operating functions, available via the RS-485, can be implemented with any typical monitoring software or controller. A filter enables the elimination of signal oscillations corresponding to contacts bouncing (of mechanical sensors). Filter is off by factory default.

Binary inputs module

8 independent voltage inputs

RS-485 / Modbus RTU

LEDs for module operation and Modbus transmission signalling

Data Sheets