Water Treatment
Products · PCSPL
Enquire NowWater Treatment
Online turbidimeters, chlorine analysers, UV monitors, pH/ORP/conductivity controllers, amperometric sensors, electrodes, dosing pumps and suspended solids sensors for water and wastewater treatment.
Explore PCSPL’s Water Treatment product range, including online turbidimeters and turbidity sensors, chlorine analysers and reagents, UV transmission analysers, pH/ORP monitors and controllers, conductivity monitors, amperometric sensors for chlorine and chlorine dioxide, industrial process electrodes, multiparameter photometric analysers, level transmitters and suspended solids sensors. Datasheets are linked below. For user manuals and other documentation, send your request to sales@pcspl.com.au.
Water Treatment Product Range
Water Treatment Products
HF Scientific MTOL+
On-Line Process Turbidimeter
More product details
- Range: 0–100 NTU (0–1,000 NTU)
- Built-in ultrasonic cleaning
- Data logging & USB port
- Simultaneous 4–20 mA & Modbus
- Relays: High / Low / System Alarm
- Fast & easy calibration procedure
Dosatronic
Amperometric Sensors
More product details
- Total & free chlorine, chlorine dioxide
- Fresh water or seawater
- Open or membrane-covered electrodes
- 2 or 3 electrode systems
- Refillable electrolyte & replaceable cap
- Outputs: 4–20 mA, 0…-2,000 mV, Modbus RTU
HF Scientific AccUView
On-Line UV Analyzer
More product details
- Range: 0–100% UV Transmission
- Built-in ultrasonic cleaning
- Low volume sample chamber
- Current output: 4–20 mA
- Relays: High / Low / System Alarm
- Fast & easy calibration procedure
HF Scientific CLX
On-Line Residual Chlorine Monitor
More product details
- Range: 0–10 mg/l (PPM)
- Free or total chlorine measurement
- Colorimetric DPD reagent
- Cycle time adjustable: 110 sec to 10 min
- 4–20 mA & RS-485 Modbus
- Two programmable relays
FIP M9.06
pH/ORP & Temp. Monitor
More product details
- Ranges: -2…16 pH, -2,000…2,000 mV
- Temperature inputs: PT100 / PT1000
- Hold & reed inputs
- Current outputs: 2× 4–20 mA
- 2× solid state relays & 2× relays
- Advanced chemical dosing functions
FIP M9.05
Conductivity & Temp. Monitor
More product details
- Range: 0.055…200,000 µS
- Temperature inputs: PT100 / PT1000
- Hold & reed inputs
- Current outputs: 2× 4–20 mA
- 2× solid state relays & 2× relays
- Large display & intuitive software
Aqua HC151
pH/ORP Control & Pump
More product details
- pH / ORP measurement & control
- Proportional dosing
- Overfeed alarm function
- Pump interlock via flow & level switch
Doseuro D Series
Mechanical Diaphragm Dosing Pump
More product details
- Max flow: 1,400 l/hr @ 6 bar
- Max pressure: 14 bar @ 49 l/hr
- Stroke length adjustment
- PP head, PTFE diaphragm & Pyrex valves
Barben pH/ORP
Industrial Process Electrodes
More product details
- Multiple annular wood filtering junctions
- Large surface area reference element
- Large volume of electrolyte
- Teflon junction, coating resistant
- Body: PVDF or PEEK
- Seals: Viton, EPDM or FFKM
Chemitec S461
LT Low Range Turbidity Sensor
More product details
- Range: 0…10 NTU / 0…100 NTU
- Output: 4–20 mA or Modbus RTU
- Measuring method: 90° scattered light
- Sensor max pressure: 4 bar
- Body: black PVC; O-ring: Viton & silicon
- Installation: submersible or sample flow cell
- 1″ BSPP rear thread with 10 m cable
HF Scientific JAW
Chlorine Reagent Set
More product details
- J.A.W. — Just Add Water
- Dry powder reagent in bottle
- Shelf life: 5 years
- Free or total chlorine
- To suit Hach® CL-17 & HF CLX chlorine analysers
- Code: 09951
Sensorex TX100
pH/mV 2-Wire Transmitter
More product details
- Loop powered: 12–24 VDC
- pH range: 0.00…14.00
- ORP range: -1999 mV…1999 mV
- Output: 4–20 mA, scaleable, isolated
- IP65 enclosure: 96×96×66 mm
- Mounting kit: wall, DIN rail & pipe
Sensorex TX300
pH/mV Transmitter & Controller
More product details
- Power supply: 100–240 VAC 50/60 Hz
- pH range: -2.00…16.00
- ORP range: -1999 mV…1999 mV
- Dual analogue outputs: 4–20 mA
- Dual setpoints (relays); contact for washing cycle
- IP65 enclosure: 144×144×115 mm
Simex CPA-K-807
Plastic Pressure Transmitter
More product details
- Ceramic sensor & PP-HT body
- Cable options: PVC, PUR, FEP
- Seal options: FKM, EPDM, FFKM
- From 0…4 mH₂O; output: 4–20 mA (2-wire)
- Accuracy: ±0.5 FSO
- Dimensions: ∅35 mm × 159 mm
Phathom T30-SWW
Suspended Solids / Turbidity Sensor
More product details
- Multi-beam attenuated & 90° scattered light
- Configurable range: 0…1,000 NTU
- Outputs: 4–20 mA & solid state relay
- Communication: Modbus RS485
- PC-based app & USB dongle
- Body: polypropylene; fingers: polysulfone
- Cable: 10 m polyurethane
Chemitec 4001
Multiparameter On-Line Photometric Analyser
More product details
- Colorimetric reaction with DPD (reagent)
- Photometric flow measuring cell
- Measures: chlorine, chlorine dioxide, ozone, peracetic acid
- Analogue outputs: 0/4–20 mA; relay outputs (PID control)
- Advanced functions: PID control, alarms, timer etc.
- RS485 Modbus & data logging
Need Water Treatment Product Support?
For product selection, datasheets or pricing on water and wastewater treatment instrumentation, PCSPL is here to help with local Australian support.
📧 Contact PCSPL Today