Fire Protection · Meister AMFE
Stop Switchboard Fires Where They Start: Meister AMFE Pro, Self-Contained Fire Protection for Industrial Plant
Detection, actuation and extinguishing in one compact unit, mounted inside the cabinet you need to protect.
The fire risk hiding in your switchboard
In a dairy, sugar mill, coal washery, wastewater treatment plant or heavy industrial site, the switchboards, motor control centres (MCCs) and control cabinets are the nerve centre of the operation. When a technical fault occurs inside one of those enclosures, a fire can start where nobody is looking, and where room-level fire systems cannot easily reach.
By the time smoke escapes the cabinet, the damage is done: burnt components, a long rectification job and, worst of all, lost production. The best place to stop an electrical fire is inside the enclosure, at the moment it starts.
What is Meister AMFE?
The AMFE (Automatic Miniature Fire Extinguisher) is a German-engineered, stand-alone fire detection and suppression device designed specifically for enclosed electrical equipment. Each unit combines three jobs in one:
- Detection: a certified thermo-glass sprinkler bulb senses heat at the top of the cabinet.
- Actuation: when the set temperature is exceeded the bulb bursts and a spring mechanism opens the cylinder.
- Extinguishing: the clean agent FK-5-1-12 is released, turns to gas and removes heat from the fire, stopping the combustion reaction.
Because the release is mechanical, the basic AMFE needs no power supply, no control unit, no piping and no electronics. It is a genuinely self-contained fire protection system for each cabinet.
How it works, in four steps
- Stand-by: the AMFE sits ready near the top of the enclosure, where heat builds up first.
- Bulb bursts: at the selected activation temperature (standard options of 68 °C, 79 °C and 93 °C) the thermo-bulb breaks.
- Cylinder opens: a spring mechanism opens the factory-sealed cylinder.
- Agent released: FK-5-1-12, heavier than air, floods the cabinet and suppresses the fire within seconds, directly at its source.
Scale it up: monitoring, remote activation and system approval
The same cylinder and mounting system is available with three activation heads, so you can start simple and integrate as needed:
- AMFE (basic): purely thermal and fully stand-alone.
- S-AMFE (signalling): a normally closed contact opens permanently on activation, telling your PLC, SCADA, alarm panel or fire panel that the unit has discharged. That signal can also be used to shut down cabinet ventilation or remove power.
- R-AMFE (remote activation): can also be fired electrically by Meister’s Multialert® Mini controller, for example from a smoke detector, or to discharge several units together in larger cabinets or across multiple cabinets.
The S-AMFE and R-AMFE carry VdS approval (G 622002) as an FK-5-1-12 small fire extinguishing system for closed switch cabinets. Meister also offers the complete VdS system-approved package, AMFE Pro Cert, which pairs AMFE units with a fire extinguishing control centre. No certification is required under fire protection system regulations to install AMFE inside electrical equipment; the VdS approval gives you independent confirmation of the product’s performance.
Key benefits for plant owners and maintenance teams
- Fire stopped at the source: inside the cabinet, before it damages other components in the cabinet or spreads to cable trays, neighbouring panels or the switch room.
- No secondary damage: FK-5-1-12 is electrically non-conductive, non-corrosive and leaves no residue. There is no water, foam or powder to clean out.
- Safe for people: FK-5-1-12 is completely harmless to humans. It does not displace oxygen, and a discharge does not require people to evacuate the area.
- Faster return to service: fast suppression, plus the option to cut power, minimises component loss and downtime.
- Retrofit any time: fits existing switchboards and panels with clamp brackets, or a magnetic mounting kit that avoids drilling.
- Sized to the enclosure: six cylinder sizes protect volumes from 0.046 m³ to 1.149 m³ each (VdS 2381, Class A), with multiple units for larger volumes.
- Built for tough sites: shock and vibration tested (EN 60068-2-27, EN 61373, EN 50155), with heavy-duty bracket kits for high-vibration and mobile plant. Rated for –30 °C to +100 °C.
- Low maintenance: a recommended annual visual and weight check, a 10-year service life and no mandatory hydrostatic testing.
Where AMFE fits in your plant
- Dairy and food processing: MCCs, VSD and PLC control panels on process lines.
- Sugar mills: switchboards and control cabinets that have to keep running through the crush.
- Coal washeries and mining: switchgear and machinery housings exposed to shock, vibration and temperature extremes, plus mobile plant.
- Sewage and wastewater: pump station and treatment plant control panels, with S-AMFE status signals back to SCADA.
- Heavy industry: switchboards, MCCs, server racks and machinery enclosures.
- Transport – rail networks and airports: electrical cabinets on rail rolling stock (the S-AMFE and R-AMFE are certified to EN 45545-2 for rail vehicles, and the S-AMFE is tested to the EN 61373 railway shock and vibration standard), plus control cabinets, server cabinets and digital signage in airports and train stations.
- Logistics and manufacturing: Meister’s references include an Amazon logistics centre, protecting its switchgear, and ABS Coatings, which installed AMFE in all of its control cabinets and switchgear to prevent costly production losses and downtime.
Why buy through PCS
Process Control Services (PCS) is the Australian distributor for Meister AMFE. We supply end users directly and help you get it right first time:
- Selecting the variant (AMFE, S-AMFE or R-AMFE) to suit your monitoring and control needs
- Sizing cylinders to your enclosure volumes
- Choosing the right activation temperature (Meister recommends logging cabinet temperatures over 48 hours first)
- Specifying the right bracket kit for standard or high-vibration installations
- Local support from Sydney, Brisbane and Melbourne, plus Auckland
- All pricing provided by quotation, tailored to your application
Protect your critical cabinets today
Tell us how many switchboards, MCCs or control panels you need to protect and their approximate dimensions, and we will recommend a solution and provide a quotation. To get a feel for the sizing first, try Meister’s online AMFE configurator: https://meister-brandschutz.de/en/amfe-configurator
Email: sales@pcspl.com.au
Phone: Sydney (02) 9319 1808 | Brisbane (07) 3299 7881 | Melbourne (03) 9859 0157 | Auckland (09) 525 3425
Web: www.pcspl.com.au
📧 Email sales@pcspl.com.au